|
|
 |
IC-756PROIII
All Mode Transceiver SSB, CW, AM & FM
Price : $$CALL$$
HF+50Mhz,
TFT Colour Display, Scope, DSP The ICOM 756 Pro III is the latest
member of the venerable "756" family that started with the 756,
756 Pro, 756 ProII. This latest version offers some incremental
improvements over the previous 756 Pro II: Improved Third Order
Intercept point of +30dBm Real time spectrum scope (with mini-scope)
The IC-756 Pro II spectrum scope display occupied the lower half
of the screen. The IC-756Pro III provides a selectable mini-scope
display mode. This allows simultaneous display of the filter,
memory-keyer and other menus along with a half-size spectrum-scope
display. etc
|
| |
|
 |
IC-7400HF/VHF
All Mode Transceiver SSB, CW, AM & FM
Price : $$CALL$$
Following on the success of the Icom IC-746, the Icom IC-7400 covers
160-10 meters plus 6 and 2 meters all mode. 100 Watts of output
is available on all bands - HF, 50 MHz and 144 MHz, making the IC-7400
a practical choice for all-around base station use. The die-cast
aluminum chassis and a large cooling fan help to stabilize the PA
circuit, providing 100% full duty cycle operation. The new Pro version
features 32 bit floating point DSP and 24-bit AD/DA converter. This
combination dramatically improves receiver performance providing
ultra wide dynamic range and good third order intercept point. An
there are NO more expensive optional filters to buy. |
| |
|
 |
IC-706
MkIIG HF/VHF/UHF All Mode Transceiver SSB, CW, AM & FM
Price : $$CALL$$
The '706' series represents one of the most popular transceivers
in amateur radio histroy. The latest version is the incredibly small
ICOM 706 Mark II G which adds many new features and capabilities
not found in the previous 706 and 706MkII versions. The "G" is an
all-mode transceiver provides 100 watts on HF and 6 meters and 50
watts on 2 meters plus 20 watts on 440 MHz. It receives from 30
kHz to 199 MHz and from 400 to 470 MHz. It features a removable,
remoteable, front panel that allows control of all features. The
large LCD display features alphanumeric memory names (9 character)
and soft key descriptions. |
| |
|
 |
IC-910H
VHF/UHF All Mode Satellite Transceiver
Price
: $$CALL$$
The introduction of the IC-910H VHF/UHF all mode transceiver from
Icom sees a new standard in Amateur Radio satellite radio technology.
Designed for all mode multi-band operation, the IC-910H provides
a compact, fully featured transceiver ideally suited to meet the
demands of the serious DX'er or satellite enthusiast. The IC-910H
improves on its well-respected predecessor, the IC-821H. Whilst
keeping the essential qualities of the IC-821H Icom have added
important features such as a large, clear LCD display, a useful
increase in transmit power output and DSP facilities. If that
was not enough, by installing the optional UX-910 1200MHz-band
unit the IC-910H becomes a tri-band all mode transceiver capable
of working on 2m, 70cms and 23cms.
|
|
|
ICOM
IC-V82
Price :$$CALL$$
The ICOM V82 provides a beefy 7 watts of output power for superior
transmit range. All this power is available with the supplied battery
pack (V82-25 version). Reduced power settings also allow you to
adapt to the communication conditions and provide longer operating
time. Up to 200 regular memory channels can be stored with a 6-character
channel name, tone and duplex settings. The memory channels can
be tagged with A-J bank name and allows you easy channel management.
In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system
to scan selected memory banks by simply adding and deleting bank
links. Built-in CTCSS/DTCS tone codes provide quiet stand-by and
allow you to access a closed repeater. |
 |
ICOM
208H
Price : $CALL$
The ICOM IC-208H 2M/440 dual bander is priced like a single
bander, but it still has all the features you want. You get: detachable
control panel, wideband receive, three power settings, built-in
CTCSS decode/encode, PC compatibility and 500 alpha memory channels.
Power output is 55/15/5 watts on 2 meters and 50/15/5 watts on
440 MHz. It is 9600 BPS packet ready too (6 pin DIN). The 208H
also includes a built-in duplexer, OPC-600/R separation cable,
HM-133 remote hand mic, mobile mounting bracket, power cord and
spare fuses.
|
|
|
ICOM
T90A
Price $CALL$ Handheld
Transceiver
The
commercial grade Icom T90A transmits on 6 meters, 2 meters and
440 MHz. The T90A is also a wide band AM, FM and Wide FM scanning
receiver. Not only can you hear your favorite TV programs with
the preprogrammed TV channels, but you can also listen to short-wave,
AM and FM broadcast radio stations, police, fire, military, aircraft,
various amateur bands and more. Receive coverage is: 495 kHz to
999.990 MHz Transmit/Receive 50-54MHz, 144-148MHz, 430-440MHz
ICOM compact and rugged construction, simple to operate. Li-ion
7.4 volt/1300ma/ah battery.
|
|
